Sorption behavior of 2,4-dichlorophenol on marine sediment

The sorption behavior of 2,4-dichlorophenol on marine sediments treated by different methods was investigated systematically. The sorption of 2,4-dichlorophenol on marine sediments was completed mainly via ion exchange and surface polar sorption. Both the Freundlich and Langmuir isotherms were fit for describing its sorption behavior. The sorption behavior of 2,4-dichlorophenol was affected by various factors including aqueous salinity and temperature. The sorption amount of 2,4-dichlorophenol on marine sediments increased with increasing ion strength, but decreased with increasing temperature.     

CCl2(A1B1)被O2及取代甲烷类分子猝灭的动力学研究

对CCl4／Ar混合气体放电产生CCl2自由基，再用541.52nm激光将电子基态CCl2激发到激发态A^1B1（0，4，0）振动态k=0能级上，通过检测 激发态CCl2时间分辨荧光信号，测得室温下CCl2(A^1B1)被O2，CF4，CF2Cl，CH3NO2，CH2Br2等分子猝灭的实验结果，用改进的三能级模型分析处理实验数据，获得态分辨速常数KA和Ka值，并对实验结果进行了讨论。     

Order from Chaos: Self‐Assembly of Nanoprism from a Mixture of Tetratopic Terpyridine‐Porphyrin Conformers

Porphyrins have been widely used in the self‐assembly of metallo‐supramolecules. In this study, we introduced 2,2':6,2"‐terpyridine (tpy) into a porphyrin core to synthesize a tetratopic building block with multiple conformers. During the self‐assembly with Zn(II), such a mixture of conformers was able to form a discrete nanoprism with all building blocks in one conformation. Detailed characterizations, including NMR, ESI‐MS and traveling‐wave ion mobility‐mass spectrometry (TWIM‐MS), all supported the formation of the desired assemblies. AFM and TEM further confirmed the dimensions of assembled nanoprisms. Moreover, the photophysical properties of the ligands and complexes were noticeably different depending upon size and metal ion center.     

蛋白质组学中质谱分析前的预富集研究进展

回顾了近年来生物质谱分析鉴定蛋白质及多肽前的预富集方法研究进展,其中包括固相微萃取富集方法、靶上富集方法、电洗脱富集方法以及磷酸化蛋白质/肽段的富集方法,总结和归纳了各种方法所具有的优缺点,引用文献59篇。     

稀溶液中环型聚苯乙烯的激基缔合物荧光效应

采用乙酸乙酯为环型和线型聚苯乙烯的非良溶剂, 确定了Mark-Houwink方程分别为[η]_r=1.91×10~(-2)·M~(0.607)和[η]_l=4.06×10~(-2)·M~(0.572)。研究了环型和线型聚苯乙烯的激基缔合物的荧光效应。通过稀溶液中环型和线型高分子线团在柔顺性上存在着差异, 解释了二者之间在荧光效应方面的差异, 并根据实验结果,确定了(I_E/I_M)c→0～M关系式分别为(I_E/I_M)r,c→0=1.91+3.40×10~(-6)M和(I_E/I_M)l,c→0=2.15+3.05×10~(-6)M。     

万古霉素手性固定相分离曼尼希碱类化合物对映体

采用大环抗生素类万古霉素手性固定相高效液相色谱法研究了一系列曼尼希碱类化合物的手性分离情况,并讨论了流动相中有机相的种类和比例、缓冲盐的种类和浓度、pH和柱温对该类化合物手性分离的影响。最佳实验条件为:乙腈:硝酸铵(35mmol/L,pH3.8)=15∶85(V/V),柱温15℃,流速0.6mL/min,检测波长300nm;四氢呋喃:硝酸铵(20mmol/L,pH4)=15∶85(V/V),柱温15℃,流速0.6mL/min,检测波长350nm。通过对比研究8种曼尼希碱类化合物的色谱行为,从结构上讨论了化合物中各种官能团对手性分离的影响,并探讨了手性分离的内在机制。     

PROGRESS IN PHASE INVERSION EMULSIFICATION FOR EPOXY RESIN WATERBORNE DISPERSIONS

In this review, our recent work in phase inversion emulsification （PIE） for polymer （especially epoxy resin） waterborne dispersions is summarized. Based on experimental results about PIE process, the physical model is proposed which can guide the synthesis of the waterborne dispersions such as polymer/nanoparticle composite dispersion. In the presence of a latent curing catalyst, PIE can give a crosslinkable epoxy resin waterborne dispersion. The dispersions can form cured transparent coatings with some unique properties such as UV shielding. They are promising in functional coatings, waterborne resin matrices for composites, and sizing for high performance fibers.     

Fabrication of lead titanate single crystalline nanowires by hydrothermal method and their characterization

Single crystalline nanowires of lead titanate (PbTiO₃) were fabricated by hydrothermal method at 200°C using lead acetate and n-tetrabutyl titanate as starting materials, where sodium hydroxide was served as a mineralizer. Crystalline phases, microstructure and optical properties of PbTiO₃ nanowires were investigated. The PbTiO₃ nanowires were uniform and continuous along the long axis, and were composed of single crystalline PbTiO₃ with a tetragonal perovskite structure. The diameter of a single nanowire was around 12 nm and the length reached up to 3 μm. The chemical composition of the samples and the valence states of elements were determined by X-ray photoelectron spectroscopy (XPS). The ultraviolet/visible absorption spectroscopic investigation suggested that the absorption edge of optical transition of the first excitonic state occurred at around 320 nm. A blue-green light emission peaking at about 471 nm (2.63 eV) is observed at room temperature, and the intensity of this emission increased with increasing excitation wavelength. Oxygen vacancies are responsible for the light emission of PbTiO₃ nanowires.     

Excess molar enthalpies of binary mixtures for (tributyl phosphate+methanol/ethanol) at 298.15 K

Excess molar enthalpies of binary mixtures for tributyl phosphate (TBP)+methanol/ethanol were measured with a TAM air Isothermal calorimeter at 298.15 K and ambient. The results for xTBP+(1–x)CH₃OH are negative in the whole range of composition, while the values for xTBP+(1–x)C₂H₅OH change from positive values at low x to small negative values at high x. The experimental results have been correlated with the Redlich–Kister polynomial. IR spectra of the mixtures were measured to investigate the effect of hydrogen bonding in the mixture.     

Synthesis, characterization, and stability of Fe-MCM-41 for production of carbon nanotubes by acetylene pyrolysis

Fe-substituted MCM-41 molecular sieves with ca. 1, 2, and 3 wt % Fe were synthesized hydrothermally using different sources of colloidal silica (HiSil and Cab-O-Sil) and characterized by ICP, XRD, N2 physisorption, UV-vis, EPR, TPR, and X-ray absorption. Catalysts synthesized from Cab-O-Sil showed higher structural order and stability than those from HiSil. The local environment of Fe in the mesoporous material as studied by UV-vis reveals the dominance of framework Fe in all the as-synthesized Fe-MCM-41 samples. Dislodgement of some Fe species to extraframework location occurs upon calcination, and this effect is more severe for Fe-MCM-41 (2 wt %) and Fe-MCM-41 (3 wt %), as confirmed by EPR and X-ray absorption. These materials have been used as catalytic templates for the production of carbon nanotubes (CNTs) by acetylene pyrolysis at atmospheric pressure. A relationship between the Fe loading in MCM-41 and the carbon species produced during this reaction has been established. Using our optimized conditions for this system, Fe-MCM-41 with ca. 2 wt % Fe showed the best results with particularly high selectivity for single-wall carbon nanotube (SWNT) production. This catalyst was selective for carbon nanotubes with a low amount of amorphous carbon for a narrow range of temperatures from 1073 to 1123 K. To account for the different selectivity of these catalysts for CNTs production, the local environment and chemical state of Fe in the used catalyst was further probed by X-band EPR.